select your workshop
Pro Workshop is available in a Pent or Apex roof Style The Pent Roof Pro Workshop will always be less than 2.5 metres and therefore not normally require Planning Permission (link to Planning Permission Page) even if sited up against your neighbour fence or border.
The Apex Roof Pro Workshop offers greater internal height but will be higher than 2.5metres at the highest point if the width is greater than 2.4 Metres (8 Feet) and would therefore require Planning Permission (link). However if you site your Pro Workshop Two Meters or more from your neighbours’ fence or boundary the Maximum height permissible without PP is 4 Metres
please select your preferred roof type
Apex
Pent
The Apex Roof Pro Workshop offers greater internal height but will be higher than 2.5metres at the highest point if the width is greater than 2.4 Metres (8 Feet) and would therefore require Planning Permission . However if you site your Pro Workshop Two Meters or more from your neighbours’ fence or boundary the Maximum height permissible without PP is 3.5 Metres Galvanised Steel Apex roof supports are bolted to the wall studs and are tensioned by an adjustable steel tie rod which is fixed to through the outer walls to a steel cross brace
The ceiling is Ply lined and insulated the standard outer covering is a heavy duty polyproproline weave non tear felt on an external grade Ply outer lining an upgrade to a steel tile roof replacing the felt is also available.